Rothenburg Crystal Shield

Description

Product features / benefits

– High pigment quality help prolonging freshness of color and providing 10 years long lasting protection for your building and home

– Self-cleaning to ensure new looking of your building and home

– Low VOCs (Volatile Organic Compounds)

– Does not contain lead and mercury, so safe to users and environment

– Resistant to fungus and lichen

Typical uses

Crystal Shield is suitable for both exterior and interior.  It can be applied on plaster, concrete, brick, gypsum board and any surfaces with similar quality.

Colors

Application Method

	New surface	Old surface
Step 1: Surface preparation	– Allow the surface to dry out over period of at least 30 days or moisture content not more than 14%– Ensure that the surface is clean and dry	– Dirt, chalky surface and peeled off paint should be washed out.– Fungus or algae covered area must be cleaned by fungus or algae cleaner after that clean it by water and let it dry 2-3 days before painting
Step 2: Primer Coat	– Apply 1 coat of Crystal Shield Alkali Resisting Primer– Leave the surface to dry about 1-2 hrs before applying top coat	– Apply 1 coat of Crystal Shield Contact Primer– Leave the surface to dry at least 6 hrs. before applying top coat
Step 3: Top Coat	– Apply 2 coats of Crystal Shield for exterior or Crystal Clean for Interior, should leave the surface to dry about 2-3 hrs. before recoating	– Apply 2 coats of Crystal Shield for exterior or Crystal Clean for Interior, should leave the surface to dry about 2-3 hrs. before recoating

 

Technical Data

Type	Finish Film	Coverage      (sq. meter/gal/coat)	Tools	Dilution	Drying Time
					Surface Dry	Dry to recoat
Crystal Shield	Semi-gloss	35 – 40	Brush, Roller, or Spray	10% of water when using a roller	30 mins	2 – 3 hrs.
	Matt			15% of water when using a brush